Home Wheel Aligners

WA0050

Haweka Electronic Truck Aligner

The AXIS4000 Haweka Aligner, is a computer-based, camera radio wheel alignment system for commercial vehicles including trailers, double & triple BÂ’s, road trains and buses. Having your commercial vehicle wheels accurately aligned can extend your tyre life by up to 25%.

Enquire Now
  • Great service from dealing with Mary on the phone to the demonstration of the equipment we needed. Will be dealing again. Cheers.

    P
    Paul Sparkes

Features

The axle measuring system AXIS4000 is a new and innovative development from Haweka. This top of the range product is the culmination of many years of experience in the field of portable wheel alignment and results in a commercial alignment system being easy to handle and simple as a car wheel alignment system.

This high quality wheel aligner system enables real-time, highly accurate and fast measurements to be made. 

Technical Features:

  • Fast measurement of the single and total toe, centring of the steering gear, camber, castor, kingpin inclination, toe-out-on-turns, max. steering angle, tilt and the axle offset
  • Computer based wheel alignment – scale alignment via software
  • Quick installation on the steel rims thanks to different magnetic holders
  • Also ideal for aluminium rims thanks to ProClamp, the quick-action clamping device (gripper-arm holder system)
  • Measurement done in normal driving condition of the vehicle – no lifting is required
  • Fast recording of the required nominal value using the 360° rotatable camera measurement heads
  • Direct display of the setup on the monitor
  • The readings are recorded by radio transmission directly onto the printout, which displays 'before/after' settings
 

FAST INPUT OF VEHICLE DATA

Following the simple selection of the vehicle to be aligned, all of the relevant vehicle data can be quickly and conveniently selected. For example, the dimensions of the rim can be entered individually.
The AXIS4000 can be used to align almost all types of commercial vehicles from small vans through to road trains.
 

SIMPLE SETUP OF MEASURING SCALES

The preparation needed to align the wheels of a vehicle is clearly explained to the user by means of a simple and clear graphic display.
 

CLEAR RECORDING OF READINGS

The information obtained is available to the user while adjustments are being made, either in a digital or analogue format, in a large and easy to understand display.
 

GRAPHIC COMMANDS

The operator is led through the individual stages thanks to a well laid out menu structure and clear instructions. The readings are displayed instantaneously for each step.
 

PRINTOUT / OVERVIEW

The overview shows the individual readings for each axle. This provides a clear comparison between the starting (before) and finishing (after) readings. The readings can then be printed out. The overview can also be stored on the computer for future reference.
 

STEEL CABINET - TROLLEY

A stable trolley ensures that all components of the AXIS4000 can be kept conveniently and securely and provides space for a computer and printer.

Features

The axle measuring system AXIS4000 is a new and innovative development from Haweka. This top of the range product is the culmination of many years of experience in the field of portable wheel alignment and results in a commercial alignment system being easy to handle and simple as a car wheel alignment system.

This high quality wheel aligner system enables real-time, highly accurate and fast measurements to be made. 

Technical Features:

  • Fast measurement of the single and total toe, centring of the steering gear, camber, castor, kingpin inclination, toe-out-on-turns, max. steering angle, tilt and the axle offset
  • Computer based wheel alignment – scale alignment via software
  • Quick installation on the steel rims thanks to different magnetic holders
  • Also ideal for aluminium rims thanks to ProClamp, the quick-action clamping device (gripper-arm holder system)
  • Measurement done in normal driving condition of the vehicle – no lifting is required
  • Fast recording of the required nominal value using the 360° rotatable camera measurement heads
  • Direct display of the setup on the monitor
  • The readings are recorded by radio transmission directly onto the printout, which displays 'before/after' settings
 

FAST INPUT OF VEHICLE DATA

Following the simple selection of the vehicle to be aligned, all of the relevant vehicle data can be quickly and conveniently selected. For example, the dimensions of the rim can be entered individually.
The AXIS4000 can be used to align almost all types of commercial vehicles from small vans through to road trains.
 

SIMPLE SETUP OF MEASURING SCALES

The preparation needed to align the wheels of a vehicle is clearly explained to the user by means of a simple and clear graphic display.
 

CLEAR RECORDING OF READINGS

The information obtained is available to the user while adjustments are being made, either in a digital or analogue format, in a large and easy to understand display.
 

GRAPHIC COMMANDS

The operator is led through the individual stages thanks to a well laid out menu structure and clear instructions. The readings are displayed instantaneously for each step.
 

PRINTOUT / OVERVIEW

The overview shows the individual readings for each axle. This provides a clear comparison between the starting (before) and finishing (after) readings. The readings can then be printed out. The overview can also be stored on the computer for future reference.
 

STEEL CABINET - TROLLEY

A stable trolley ensures that all components of the AXIS4000 can be kept conveniently and securely and provides space for a computer and printer.

Technical Information

Number of channels: 10
Transmission power (mW): 10
Charger operating voltage (V): 100-240
Toe measurement (+-)(degrees): 5
Camber measurement (+-)(degrees): -15 +15
Castor (+-) (degrees): -5 +18
KPI (+-) (degrees): -10 +20
Operating time with fully charged batteries (h): >10

We partner with FinanceNow and eLeasing for easy ownership options.

Rental
Key advantages of rental are:
  • Conserves capital and cash
  • Access to higher standard equipment that would be too expensive to buy outright
  • Fixed monthly payments for easy cashflow forecasting
  • Easy to upgrade or replace with little extra cost
  • Payments are usually fully tax deductible
Asset Finance
Key Advantages of Asset Finance are:
  • You own the equipment from start of contract
  • Terms up to 60 months
  • Often no deposit needed
  • Competitive rates
  • Tax deductibility on GST almost immediately and interest and depreciation thereafter
Blackfern Co-op Members
Blackfern also has a range of interest free extended payment terms. Quote your member number when you talk to us, and we can explain your options.
Wheel Aligners
We use Mainstream as our freight carrier. From dispatch you can typically expect your Wheel aligner within the following timeframes:
Auckland: 1-2 days
Rest of North Island: 2-3 Days
South Island:4-5 days

Our Carriers deliver the equipment on a standard curtain-sider truck. If you don’t have a forklift or don’t have access to one, please speak with our team as we will have to assess if delivery via tail-lift and a pallet truck is possible.

Enquire Now

In order to assist us in reducing spam, please type the characters you see:

Thank you for your interest.

Please enter your details and the document will be emailed to you immediately.

You may also like