Home Automotive Workshop Tools

WT5550

Steiner Brake Lathe Disc & Drum

$12,950.00 excl GST

The quality Steiner Brake Lathe is 100% made in South Korea.

Enquire Now

Features

​​​​​​It is an off-vehicle machine designed for machining both disc’s & drums. Due to the nature of the cast iron, the brake disc has a tendency to be reshaped by repeated tempering of heat, air, rain and snow. The affect of these factors can cause DTV (Disc Thickness Variation), roughness and run out of the brake disc. In this context, disc machining is considered as the most efficient way to solve such braking problems.  It's an essential piece of equipment for tyre dealerships and vehicle repair shops.
 
  • Designed & manufactured in South Korea
  • Control panel for the adjustment & setting of arbor & machining speeds
  • Automatic cut-off of the machine once machining has finished
  • Safety cover with built-in LED light for visibility
  • Heavy duty cast construction for precise machining results
  • Capable of machining all common vehicle discs and drums
  • Full range centre cones, spaces and cups

Features

​​​​​​It is an off-vehicle machine designed for machining both disc’s & drums. Due to the nature of the cast iron, the brake disc has a tendency to be reshaped by repeated tempering of heat, air, rain and snow. The affect of these factors can cause DTV (Disc Thickness Variation), roughness and run out of the brake disc. In this context, disc machining is considered as the most efficient way to solve such braking problems.  It's an essential piece of equipment for tyre dealerships and vehicle repair shops.
 
  • Designed & manufactured in South Korea
  • Control panel for the adjustment & setting of arbor & machining speeds
  • Automatic cut-off of the machine once machining has finished
  • Safety cover with built-in LED light for visibility
  • Heavy duty cast construction for precise machining results
  • Capable of machining all common vehicle discs and drums
  • Full range centre cones, spaces and cups

Technical Information

Power requirement: 110-20v 1 phase 50/60Hz
Main Motor: 1HP 1.714RPM 15:1 ratio (geared ratio)
Feed Motor: 2 Gear DC Motor
Arbor Speed (RPM): 0 - 120
Drum/Rotor Feed Speed: vaiable
Drum Diameter (mm): 150-590
Drum Depth (mm): 140
Disk (Rotor) size maximum diameter (mm): 420
Disk (Rotor) thickness (mm): 50
Arbor Diameter (mm): 30
Machine Weight (kg): 250

Enquire Now

In order to assist us in reducing spam, please type the characters you see:

Thank you for your interest.

Please enter your details and the document will be emailed to you immediately.

You may also like