Home Car Hoists Speciality Hoists

1690800012

Beissbarth Q.Lign 360 T.41 Wheel Aligner

The Ultimate wall-mounted 3D system for space saving and reliability

Enquire Now
  • Great knowledgeable team. Great communication. Everyone's great to deal with and all the gear is really high quality at fair pricing.

    Matt Green

Features

Ultimate productivity - vehicle after vehicle
The Q.Lign 360° builds on the existing Q.Lign platform and focuses entirely on wheel alignment. With Q.Lign 360°, workshops raise the bar even higher to exploit their full service potential.

Measuring at the highest level
  • Camera beam measures permanently from a height of 2.8 meters
  • No motor, no winch, no wear and tear
  • No up, no down, no injuries or damage
  • No movement, no matter if short or long wheelbases
Everything perfectly in sight
  • Four wheels, four cameras
  • Separate camera for the rear axle for more accurate toe values on the front axle
  • Install anywhere within 1.8 to 4,2 meters of the front axle
  • Measure and adjust from 0 to 2 meters platform height at any time
Never run out of space again
  • Fixation on the wall and direct tablet operation
  • No trolley, no post that take up space
  • Measure from 1,8 to 4,2m distance to the front axle
  • Frees up space around the complete alignment bay
Work smarter, not harder
  • Measurement starts directly with attachment of the targets to quickly determine accident vehicles
  • All targets work on any wheel reduces setup times and setup errors
  • Active MEMS Technology: Constant measurement against gravity for uncompromising accuracy
  • Caster sweep at floor level without the need for a stool or ladder
  • Access to clear and easy-to-understand PDF reports from anywhere inside your shop
The world's first web-based wheel aligner
  • Eliminates need for trolley and PC and creates more space
  • Incredibly efficient with up to 95% power savings compared to PC-based systems
  • Stream-to-X: Access software on any TV, PC, laptop, tablet or smartphone
  • Intuitive software, streamlined operations, more productivity
  • Easy integration of Q.Lign into your shop's daily processes and systems
Full speed, without compromising on precision
  • Powerful software with optimized workflow for the entire wheel alignment process
  • Reduced runout process for more productivity
  • 3D camera technology produces highly accurate realtime measurements
Space requirement
  • Minimum height of 2800mm
  • Minimum clearance of 2800mm on four-post lifts
Scope of delivery
  • Camera beam with 4 cameras
  • Q.Lign display module
  • 4x Q.Grip wheel clamps
  • Wall storage for Q.Grips
  • 4x targets with AutoID
  • Tablet
  • Brake lock and steering wheel lock
  • Front turntables and filling bars
  • Powerbox for power supply
  • Extendable wall fixation

Features

Ultimate productivity - vehicle after vehicle
The Q.Lign 360° builds on the existing Q.Lign platform and focuses entirely on wheel alignment. With Q.Lign 360°, workshops raise the bar even higher to exploit their full service potential.

Measuring at the highest level
  • Camera beam measures permanently from a height of 2.8 meters
  • No motor, no winch, no wear and tear
  • No up, no down, no injuries or damage
  • No movement, no matter if short or long wheelbases
Everything perfectly in sight
  • Four wheels, four cameras
  • Separate camera for the rear axle for more accurate toe values on the front axle
  • Install anywhere within 1.8 to 4,2 meters of the front axle
  • Measure and adjust from 0 to 2 meters platform height at any time
Never run out of space again
  • Fixation on the wall and direct tablet operation
  • No trolley, no post that take up space
  • Measure from 1,8 to 4,2m distance to the front axle
  • Frees up space around the complete alignment bay
Work smarter, not harder
  • Measurement starts directly with attachment of the targets to quickly determine accident vehicles
  • All targets work on any wheel reduces setup times and setup errors
  • Active MEMS Technology: Constant measurement against gravity for uncompromising accuracy
  • Caster sweep at floor level without the need for a stool or ladder
  • Access to clear and easy-to-understand PDF reports from anywhere inside your shop
The world's first web-based wheel aligner
  • Eliminates need for trolley and PC and creates more space
  • Incredibly efficient with up to 95% power savings compared to PC-based systems
  • Stream-to-X: Access software on any TV, PC, laptop, tablet or smartphone
  • Intuitive software, streamlined operations, more productivity
  • Easy integration of Q.Lign into your shop's daily processes and systems
Full speed, without compromising on precision
  • Powerful software with optimized workflow for the entire wheel alignment process
  • Reduced runout process for more productivity
  • 3D camera technology produces highly accurate realtime measurements
Space requirement
  • Minimum height of 2800mm
  • Minimum clearance of 2800mm on four-post lifts
Scope of delivery
  • Camera beam with 4 cameras
  • Q.Lign display module
  • 4x Q.Grip wheel clamps
  • Wall storage for Q.Grips
  • 4x targets with AutoID
  • Tablet
  • Brake lock and steering wheel lock
  • Front turntables and filling bars
  • Powerbox for power supply
  • Extendable wall fixation

Technical Information

Power: 90-264V | 47-63 Hz
Individual toe front/rear axle: Yes
Total toe: Yes
Toe-out on turns: Yes
Camber front/rear axle: Yes
Caster: Yes
SAI: Yes
Set-back: Yes
Thrust angle: Yes
Sensor count: 4 pieces
Data transmission type: Wireless
Measuring system: 3D with fixed Measuring Bar
Display: 10"
Power consumption: 45W
wheel base: 1750-4600mm
Space requirement width: 2595mm
Run-out Compensation: Yes
Individual toe front axle: Yes
Individual toe rear axle: Yes
Camber front: Yes
Camber rear: Yes
Set-back front axle: Yes
Set-back rear axle: Yes
Geometric centre line: Yes
Included Angle: Yes
Ride height modified vehicle specs: Yes
Vehicle dimensions live: Yes
Set-up height of bar: 280mm
Country of Manufacture: Germany
Distance from camera to center of turntable: 1800-3300mm
clearance between front posts for 4 Post Lift: 2800mm
Our installation Program includes 8 hours of training that can be tailored to suit your schedule. 

We partner with FinanceNow and eLeasing for easy ownership options.

Rental
Key advantages of rental are:
  • Conserves capital and cash
  • Access to higher standard equipment that would be too expensive to buy outright
  • Fixed monthly payments for easy cashflow forecasting
  • Easy to upgrade or replace with little extra cost
  • Payments are usually fully tax deductible
Asset Finance
Key Advantages of Asset Finance are:
  • You own the equipment from start of contract
  • Terms up to 60 months
  • Often no deposit needed
  • Competitive rates
  • Tax deductibility on GST almost immediately and interest and depreciation thereafter
Blackfern Co-op Members
Blackfern also has a range of interest free extended payment terms. Quote your member number when you talk to us, and we can explain your options.
Wheel Aligners
We use Mainstream as our freight carrier. From dispatch you can typically expect your Wheel aligner within the following timeframes:
Auckland: 1-2 days
Rest of North Island: 2-3 Days
South Island:4-5 days

Our Carriers deliver the equipment on a standard curtain-sider truck. If you don’t have a forklift or don’t have access to one, please speak with our team as we will have to assess if delivery via tail-lift and a pallet truck is possible.

Enquire Now

In order to assist us in reducing spam, please type the characters you see:

Thank you for your interest.

Please enter your details and the document will be emailed to you immediately.

You may also like

No products found