SKU: VAS701011

Beisbarth VAS 701 011 Volkswagon Group Homologated Wheel Aligner

The VAS 701 011 eliminates space concerns and frees up the entire alignment bay.

Features

No trolley,
full mobility,
infinite possibilities.

Onboard image processing in real time and powerful Li-ion batteries replace the complete trolley with PC and ensure maximum mobility.

• Completely wireless
• No trolley, no column, no space problems
• Tablet-operated, even from underneath the vehicle
• Position anywhere to measure, even on the ground

The two measurement pods are equipped with a total of four OLED displays and an active reference system. This allows for easier adjustments with a straight steering wheel, guaranteed.

The active reference system from left to right pod compensates movements and vibrations in realtime. This means that the position in relation to the vehicle can be compensated in 3D at any time during the measurement.

• Reliable values in every height of the lift
• Guaranteed straight steering wheels
• Compensation of movements and vibrations

The OLED displays show the toe, camber and caster values for each wheel. This makes it easy to make adjustments under the vehicle, no matter the height of the lift.

• Measured values always in view – even from underneath the vehicle
• Both hands free during all adjustment work
• Display moves with lift to desired height, depending on the height of the mechanic

With the Q.Grip clamps, the targets are mounted in seconds – without any contact with the rim.

The Q.Grip wheel clamps allow quicker mounting without removing hubcaps or plastic caps and without any contact to the rim.
Attach the Q.Grips in seconds. For small and large wheels from 525 to 835 mm wheel diameter.
• Rapid switching between different wheel sizes
• No knob-twisting to adjust to different wheel sizes
• No touching, no scratching of rims
• Three arms for a secure and precise hold
throughout the complete alignment process
• Save time with every alignment.
• To shorten walking distances, the Q.Grip wheel clamps – when not in use – can be stored in the two wall adapters to the left and right of the vehicle.

Quick software, intuitive workflows, easy-to-understand printouts

The software of the VAS 701 011 sets a new benchmark in terms of speed.
• Intuitive program sequences promote rapid familiarization
• Clear display and graphics simplify operation
• Protocols optimized for easy understanding by the end customer
• Automated intermediate steps save clicksand walking distances around the vehicle
• Reactive software shows movements in realtime
• Automatic compensation of common errors
• Quick accident assessment with cross-diagonal measurement

Wheel alignment has never been so easy! The VAS 701 011 software guides users of all levels of experience safely through the entire alignment process.

Connectivity first: Seamless integration into every workshop network

VAS 701 011 forms its own measurement network that merges with the workshop network. This enables workshops to increase their efficiency:
• Access to customer reports as PDF from any PC in the network
• Connection to Workshop-Net (ASA) included as standard
• Edit customer data conveniently from the office – instead of in the workshop
• Print reports via network printer
• Control the wheel alignment program with any device in the same network

Every target carries a QR code with the calibration parameters attached to its reverse side. Scanning the code automatically transfers the exact measurement coordinates during the initial setup.
• No calibration necessary
• Plug & play
• Highest precision guaranteed
Thanks to this patented setup procedure, the targets can easily be switched among the wheel clamps without the any of pre-compensation, e.g. Porsche central clamps or magnetic clamps.

VAS 701 011 Scope of delivery

2x VAS 701 011 sensor heads with OLED displays
Display module for direct streaming to TV, PC, laptop or tablet
Tablet
2x Li-Ion batteries with charging station
4x Q.Grips
4 targets
Wall storage for wheel clamps
New Generation Software
Extensive target database
Lift adaption
Wall board for storage of sensor heads and battery charger
Steering wheel and brake pedal lock
2x electronic turntables
4x filling pieces for turntables
2x connecting cable for turntable
Key Card VAS6767/2
Key Card vehicle specs

Wheel Base	1,500 to 4,500 mm
Measure & adjust at any lift heights	0 to 2,000 mm
Q.Grip Clamping Diameter	525 - 835 mm
Power Supply	100-230V / 1PH / 50-60Hz
Output	45W
Weight	80kg
Shipping Dimensions	1080 x 960 x 900 mm

Features

No trolley,
full mobility,
infinite possibilities.

Onboard image processing in real time and powerful Li-ion batteries replace the complete trolley with PC and ensure maximum mobility.

• Completely wireless
• No trolley, no column, no space problems
• Tablet-operated, even from underneath the vehicle
• Position anywhere to measure, even on the ground

The two measurement pods are equipped with a total of four OLED displays and an active reference system. This allows for easier adjustments with a straight steering wheel, guaranteed.

The active reference system from left to right pod compensates movements and vibrations in realtime. This means that the position in relation to the vehicle can be compensated in 3D at any time during the measurement.

• Reliable values in every height of the lift
• Guaranteed straight steering wheels
• Compensation of movements and vibrations

The OLED displays show the toe, camber and caster values for each wheel. This makes it easy to make adjustments under the vehicle, no matter the height of the lift.

• Measured values always in view – even from underneath the vehicle
• Both hands free during all adjustment work
• Display moves with lift to desired height, depending on the height of the mechanic

With the Q.Grip clamps, the targets are mounted in seconds – without any contact with the rim.

The Q.Grip wheel clamps allow quicker mounting without removing hubcaps or plastic caps and without any contact to the rim.
Attach the Q.Grips in seconds. For small and large wheels from 525 to 835 mm wheel diameter.
• Rapid switching between different wheel sizes
• No knob-twisting to adjust to different wheel sizes
• No touching, no scratching of rims
• Three arms for a secure and precise hold
throughout the complete alignment process
• Save time with every alignment.
• To shorten walking distances, the Q.Grip wheel clamps – when not in use – can be stored in the two wall adapters to the left and right of the vehicle.

Quick software, intuitive workflows, easy-to-understand printouts

The software of the VAS 701 011 sets a new benchmark in terms of speed.
• Intuitive program sequences promote rapid familiarization
• Clear display and graphics simplify operation
• Protocols optimized for easy understanding by the end customer
• Automated intermediate steps save clicksand walking distances around the vehicle
• Reactive software shows movements in realtime
• Automatic compensation of common errors
• Quick accident assessment with cross-diagonal measurement

Wheel alignment has never been so easy! The VAS 701 011 software guides users of all levels of experience safely through the entire alignment process.

Connectivity first: Seamless integration into every workshop network

VAS 701 011 forms its own measurement network that merges with the workshop network. This enables workshops to increase their efficiency:
• Access to customer reports as PDF from any PC in the network
• Connection to Workshop-Net (ASA) included as standard
• Edit customer data conveniently from the office – instead of in the workshop
• Print reports via network printer
• Control the wheel alignment program with any device in the same network

Every target carries a QR code with the calibration parameters attached to its reverse side. Scanning the code automatically transfers the exact measurement coordinates during the initial setup.
• No calibration necessary
• Plug & play
• Highest precision guaranteed
Thanks to this patented setup procedure, the targets can easily be switched among the wheel clamps without the any of pre-compensation, e.g. Porsche central clamps or magnetic clamps.

VAS 701 011 Scope of delivery

2x VAS 701 011 sensor heads with OLED displays
Display module for direct streaming to TV, PC, laptop or tablet
Tablet
2x Li-Ion batteries with charging station
4x Q.Grips
4 targets
Wall storage for wheel clamps
New Generation Software
Extensive target database
Lift adaption
Wall board for storage of sensor heads and battery charger
Steering wheel and brake pedal lock
2x electronic turntables
4x filling pieces for turntables
2x connecting cable for turntable
Key Card VAS6767/2
Key Card vehicle specs

Wheel Base	1,500 to 4,500 mm
Measure & adjust at any lift heights	0 to 2,000 mm
Q.Grip Clamping Diameter	525 - 835 mm
Power Supply	100-230V / 1PH / 50-60Hz
Output	45W
Weight	80kg
Shipping Dimensions	1080 x 960 x 900 mm

Our installation Program includes 8 hours of training that can be tailored to suit your schedule.

We partner with FinanceNow and eLeasing for easy ownership options.

Rental
Key advantages of rental are:

Conserves capital and cash
Access to higher standard equipment that would be too expensive to buy outright
Fixed monthly payments for easy cashflow forecasting
Easy to upgrade or replace with little extra cost
Payments are usually fully tax deductible

Asset Finance
Key Advantages of Asset Finance are:

You own the equipment from start of contract
Terms up to 60 months
Often no deposit needed
Competitive rates
Tax deductibility on GST almost immediately and interest and depreciation thereafter

Blackfern Co-op Members
Blackfern also has a range of interest free extended payment terms. Quote your member number when you talk to us, and we can explain your options.

Wheel Aligners
We use Mainstream as our freight carrier. From dispatch you can typically expect your Wheel aligner within the following timeframes:
Auckland: 1-2 days
Rest of North Island: 2-3 Days
South Island:4-5 days

Our Carriers deliver the equipment on a standard curtain-sider truck. If you don’t have a forklift or don’t have access to one, please speak with our team as we will have to assess if delivery via tail-lift and a pallet truck is possible.